鑄鐵平板制造工藝規程的內容
時間：2016/1/4 15:15:33
瀏覽量：297
鑄鐵平板制造工藝過程包括有毛坯鑄造、基面的加工、表面的開槽、熱處理、表面處理以有檢驗、劃線等多道工序。工藝規程的內容不僅僅是各加工工序的順序排列，而且應包括各道工序的加工內容，工序技術要求及與其它工序間的相互關系等，是刀具制造全過程的綜合體現。其主要內容包括以下幾個方面：
1、毛壞的選擇和確定，包括毛坯的形狀、材質、硬度和制取方法等。
2、先擇平板（臺）表面的具體加工方法，正確擬定加工工序的內容和總體工藝流程。
3、各道工序的具體加工內容、工藝基準和工序技術要求等。
4、確定工序間的加工余量和工序尺寸。
5、各工序所需工、夾、量具的確定，根據需要設計和制造二類工、夾、量具。
6、填寫工藝文件。
在編制工藝規程時，應認真研究平板工作圖，要從本單位實際加工能力和技術條件出發，并吸取先進生產經驗，使所制定的工藝規程能保證平板質量要求，并具有高的生產效率，以獲得最佳經濟效益。
工藝規程的編制受多種因素的影響，其內容或繁或簡，或細或粗，不能形成統一的規定。但其主要內容還是一致的，即應包括上述各項內容。在實際生產中，很可能出現工藝條件相同，加工對象相同的兩個不同單位所編制工的工藝規程互不相同的情況，這也是不奇怪的。只要其行之有效，能保證設計要求，就是可以的。隨著新技術、新工藝、新材料和新設備的不斷出現，工藝規程也需不斷進行修改和完善。
The process of manufacturing the cast iron plate includes blank casting, processing of the base surface, surface grooving, heat treatment, surface treatment for inspection, scribing and the like. The content of the process specification is not only the order of the various processing steps, but also includes the processing content of each process, the technical requirements of the process and the relationship with other processes, etc., which is a comprehensive reflection of the whole process of tool manufacturing. Its main contents include the following aspects:
1. Selection and determination of gross damage, including the shape, material, hardness and preparation method of the blank.
2. First select the specific processing method of the surface of the flat plate (table), and correctly formulate the content of the processing process and the overall process flow.
3. The specific processing content, process benchmark and process technical requirements of each process.
4. Determine the machining allowance and process size between processes.
5. Determine the work, clamps and measuring tools required for each process, and design and manufacture the second type of work, clamps and measuring tools as needed.
6. Fill in the process documents.
In the preparation of the process specification, the working drawing of the plate should be carefully studied. It is necessary to proceed from the actual processing capacity and technical conditions of the unit and draw on the advanced production experience so that the established process specifications can ensure the quality requirements of the plate and have high production efficiency. For the best economic benefit.
The preparation of the process specification is influenced by many factors, and its content is either complicated or simple, or it is thin or thick, and cannot form a unified regulation. However, its main content is consistent, that is, it should include the above items. In actual production, it is not surprising that the process conditions of the two different units with the same processing conditions and the same processing objects are different. As long as it works, it can be guaranteed that the design requirements can be guaranteed. With the continuous emergence of new technologies, new processes, new materials and new equipment, the process regulations need to be continuously revised and improved.
Company name: botou zhuoyuan mechanical equipment manufacturing co.,LTD
Registered
address: jiaohe development zone, botou city, hebei province
Fax
number: 0317-8031093
Contact
information: 15369812793 (WeChat with the same number) liansheng chu
Postcode:
062151
Enterprise
email:
1358827475@qq.com
Account
Opening Bank: Botou Branch of Bank of China
Account
number: 100399943203
Agricultural
bank account number: 6228481739059615270
http://zhuoyuanjixie.com